I was so over expired propane bottles so was overjoyed to see this Blackstone conversion kit. Although I quickly lost my joy when I read that my model #2022 (pellet griddle combo) was not convertible. Upon research, stumbled across a Reddit post stating otherwise, so decided to go ahead and open the package (I mean, it’s only money, right?). I was able to convert it, the jets and wrench worked great and, with the minor caveat of having to cut about two inches off each side of the wind deflectors so they would slide on,there were no problems. I do love the conversion, nice hot solid blue flame. My IR gun gives a reading of 480+° on the griddle.

While installation was pretty straightforward, I had difficulty removing the LPG orifices. On my OMNI griddle the orifices are recessed, necessitating use of the longer end of the wrench to reach them. Trouble is that the shorter end doesn’t provide enough leverage to break the sealant and loosen the screws.

Easy to install, good directions. just took the kit to the local hardware store to buy one more fitting on my gas line

So far so good. A bit of a warning though. Be sure the install the correct kit, if you put in the wrong kit the griddle gets way way to hot.

The natural gas conversion kit was easy to install. I’m thankful for multiple small parts as they are easily lost.

The kit worked as expected but the instructions were not particularly clear. Also, It is unclear on which models to use the wind guards and where to install them. I've done this before on other grills so I was able to figure it out but a novice would have a very difficult time with the instructions.

Product as detailed. Easy to install and fit proper. Watch the video by Blackstone and the instructions are accurate and easy to follow

The kit was easy to install, but to be fair this isn't my first conversion, my gas grill has also been converted. The one caution is the instructions call for high heat thread sealer. Just get one of the two products listed in the instructions and you will be fine.

Doesn't contain correct orifices sizes for some griddles. The description implies all 28" griddles are compatible. I have 28" 2145 model and the orifices in this model are smaller with a different thread size. There should be a more thorough chart for determining compatibility.

It was easier than I thought to convert my Blackstone. Great instructions.