Landscape Lighting
Color & Finish
Lamp Type
Lamp Size
Special Offers
Shop by Color
Sonder Living
Weather-resistant, usable indoors and outdoors. Powder-coated recyclable aluminum frame. Shade in outdoors technical fabric (OTF). Top ring for easy handling and hanging. A detachable solar module enables easy to recharge. 3 intensity light levels. Auto on/off.
FLOS
Out of Stock
Created by the dynamic team of Rossi and Bianchi, the Ipnos outdoor floor lamp mixes illusion with function—and the result is nothing short of magical. LED lights line the top of its extruded aluminum frame, which is anodized in various finishes. Transparent PC (polycarbonate) diffusers protect the light source. There is a driver on the plug; the on/off switch is on the cord.
SONNEMAN
Geometric solids in unity with rectilinear columns form single-sided and double-sided LED illuminated bollards that compose the dramatic impact of crisp simplicity.
WAC Landscape Lighting
Function meets durability with the WAC Landscape Lighting LED accent light. A simple fixture twist at indexed intervals (15, 30, 45, and 60-degree indexes) allows continuous beam angle adjustment from flood to spot while a mechanical dial at the base provides smooth integral brightness control. One SKU fits most applications, eliminating the need to choose from dozens of light bulbs with varying beam angles and light outputs compared to traditional landscape accent lights. This accent light is factory-sealed and watertight with an IP66 rating for protection against high-pressure water jets and outdoor elements. A detachable shroud and a 9-inch mounting spike for 12V fixtures (120V fixtures require Sku# M6000-STAKE, power stake sold separately). Includes a 3ft lead wire and two gel-filled direct burial wire nuts. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Enhanced protection against corrosive elements and is recommended for use in coastal or marine environments. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.
Function meets durability with this LED 6-in inground light. A twist of the light engine inside of the housing at indexed intervals allows fixed beam angle adjustment from flood to spot while a mechanical dial at the base of the light engine provides smooth integral brightness control. The light engine can be tilted in two 10-degree intervals and rotated to cast light in any direction. This wall light has a removable cover that is gasketed to create a water-tight seal with an IP67 rating for protection against high-pressure water jets and outdoor elements. Includes a 3ft lead wire with two gel-filled direct burial wire nuts. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments. Enhanced protection against corrosive elements and is recommended for use in coastal or marine environments. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.
This state-of-the-art landscape lighting wall wash is packed with features. The adjustable wall wash light engine can also be rotated 90 degrees vertically to create a uniform wall wash that can adapt to changing needs. A simple twist of the dial located at the back of the fixture allows continuous beam angle adjustment with indexed intervals from flood to spot while a mechanical dial at the base provides smooth integral brightness control. One SKU fits most applications, eliminating the need to choose from dozens of light bulbs with varying beam angles and light outputs when compared with traditional landscape lights. Factory-sealed and watertight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. A detachable shroud is included along with a 9 mounting spike for 12V fixtures, power stake sold separately). Includes a 3ft lead wire and two gel-filled direct burial wire nuts. A powerhouse all-in-one flood light. A magnetic or electronic power supply is required (sold separately) for 12V fixtures.
Create dynamic, eye-catching stunning vignettes with the WAC Colorscaping system. Celebrate artful illumination with new Colorscaping wall wash and accent lights from WAC landscape lighting. Heighten drama to render visual impact on magnificent tree trunk and branch silhouettes, brilliant colorful scenery on your hedgerow, or a swath of light washing a facade. Customize your experiences and enjoy your passion for color and the language of light with unbridled enthusiasm and a nearly endless palette. The LED luminaires also include adjustable brightness and continuous, lockable beam angle flexibility. Colorscaping is a state-of-the-art fully tunable landscape lighting system where each luminaire can be individually controlled or grouped from the Mywac IOS or Android app. Every Colorscaping fixture can be adjusted from 2700K to 6500K and millions of bright and vibrant colors. Colorscaping fixtures connect to a patented WAC power supply that is sold in 150W (8150CS-TRN-SS) and 300W (8300CS-TRN-SS) capacities. WAC Colorscaping fixtures are installed to the power supply using standard 12-2 landscape wire making the system incredibly simple to install and retrofit onto an existing landscape lighting system. Data is communicated to Colorscaping fixtures through the 12-2 low voltage landscape cable using plc (power line communication) technology that sends data signals between the power supply and Colorscaping fixtures, eliminating the need to run secondary wires that can be found in competing smart or color changing landscape systems. Wifi powered WAC Colorscaping power supply can control all fixtures with no wifi range limitation to your fixtures as long as the power supply is within wifi range (a cat45 port is available on the power supply for a more reliable hardwired internet connection). The WAC Colorscaping power supply features two shared power banks that can be used to power both colorscaping and basic 12V landscape lighting fixtures on a single system, activating complete smart controls for Colorscaping fixtures, and basic smart features for Non-Colorscaping fixtures, including timer/scheduler, on/off, and brightness control (note: does not make Non-Colorscaping fixtures color tunable). The WAC Colorscaping power supply has multiple 12 V taps that can autodetect voltage drop and send a guaranteed balanced 12V to each landscape lighting fixture on the system. The WAC Colorscaping power supply has 16-quick adjust color settings that you can interface with to easily toggle and test your Colorscaping fixtures.
Louis Poulsen
Bysted Garden is an almost identical, downscaled version of the original Bysted bollard, perfected for easy on-the-spot installation to improve the quality of light in both commercial and residential outdoor spaces. Its downscaled design is based on the same concept as the original Bysted. Four rings redirect the light downward while glowing at night and giving the product individuality and character. Minor modifications were made to the original Bysted design. The bolts on top of the garden fixture have been removed for a more streamlined, minimalistic look. The fixture has been developed in durable cast aluminum that will not patinate over time. Bysted Garden is connected to a remote 24VDC power supply, which can run up to multiple bollards. The fixture truly stands out both individually and in installations with multiple units, creating an attractive atmosphere wherever it is installed. It is just as beautifully suited to natural settings as it is to urban garden environments.
This outdoor lamp emits a pleasant, fully shaded, downwardly directed, glare-free light. The inside of the shade is painted white to ensure a soft and pleasant reflection of light. The shape of the shade provides superior lighting, allowing an optimal view of its surroundings. The garden bollard can be fitted with three different installation types – namely a base plate, a spike, or an anchor.
Function meets durability with this LED wall wash. A twist of the light engine inside of the housing at indexed intervals allows fixed beam angle adjustment from flood to spot while a mechanical dial at the base of the light engine provides smooth integral brightness control. The light engine can be tilted in two 15-degree intervals and rotated to cast light in any direction. One SKU fits most applications, eliminating the need to choose from dozens of light bulbs with varying light outputs compared to traditional landscape lights. This wall light has a removable cover that is gasketed to create a water-tight seal with an IP66 rating for protection against high-pressure water jets and outdoor elements. Includes a 3ft lead wire with two gel-filled direct burial wire nuts. Cast using a special K-alloy aluminum that is engineered to withstand the most challenging environments. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.
Create dynamic, eye-catching stunning vignettes with the WAC Colorscaping system. This weatherproof marvel offers vibrant RGB color changes and adjustable white light (2700K to 5000K) for any mood or occasion. Effortless installation with push-in connectors and seamless integration into smart home systems like Google Home and Amazon Alexa via the WAC outdoor controller. Plus, enjoy exceptional clarity and precision with dedicated white LED chips. Colorscaping is a state-of-the-art fully tunable landscape lighting system where each luminaire can be individually controlled or grouped from the myWAC iOS or Android App. Every Colorscaping fixture can be adjusted from 2700K to 6500K and millions of bright and vibrant colors. Colorscaping fixtures connect to a patented WAC Power Supply that is sold in 150W (8150CS-TRN-SS) and 300W (8300CS-TRN-SS) capacities. WAC Colorscaping fixtures are installed to the power supply using standard 12-2 landscape wire making the system incredibly simple to install and retrofit onto an existing landscape lighting system. Data is communicated to Colorscaping fixtures through the 12-2 low voltage landscape cable using PLC (Power Line Communication) technology that sends data signals between the power supply and Colorscaping fixtures, eliminating the need to run secondary wires that can be found in competing smart or color changing landscape systems. Wifi-powered WAC Colorscaping Power Supply can control all fixtures with no Wifi range limitation to your fixtures as long as the power supply is within Wifi range (Cat45 port is available on the power supply for a more reliable hardwired internet connection). The WAC Colorscaping Power Supply features two shared power banks that can be used to power both Colorscaping and basic 12V landscape lighting fixtures on a single system, activating complete smart controls for Colorscaping fixtures and basic smart features for non-Colorscaping fixtures, including timer/scheduler, on/off, and brightness control (note: does not make non-Colorscaping fixtures color tunable). The WAC Colorscaping power supply has multiple 12V taps that can autodetect voltage drop and send a guaranteed balanced 12V to each landscape lighting fixture on the system. The WAC Colorscaping power supply has 16-quick adjust color settings that you can interface with to easily toggle and test your Colorscaping fixtures.
Loading...