Showing results for "smart table"

A multipoint dimmer module that works exclusively with our US range of wall plates and detail kits. It operates with a push ON/OFF, has a rotary dimmer action, plus multi-location dimming functionality (via retractive toggle modules). It can be used on a lighting circuit that powers dimmable LED, incandescent or halogen bulbs, and it is optimised for use with all Buster + Punch dimmable light bulbs.Team this dimmer with Buster + Punch retractive toggle modules to turn the lighting circuit on/off and up/down from a second location. The "multipoint" functionality is possible when pairing this dimming module with more than 1 retractive switch, because the dimmer can be controlled by up to 10 retractive switches connected to the dimmer in the same circuit. This is ideal in large spaces where the lighting needs to be controlled from different locations. A short press turns the lights on/off, while a long press cycles the brightness up and down to reach the desired brightness level. Please note that this product is not compatible with the 3-way or intermediate toggle modules.

• Plug-in: No.
• Dimmer: Yes.

The dimmer module has intelligent load matching to enhance compatibility, while minimising noise and flicker. It can be used on a lighting circuit that powers dimmable LED, low voltage bulbs, LED drivers, and it is optimised for use with all Buster + Punch dimmable light bulbs. The dimmer module has a max load of 250W for LED and 300W halogen or incandescent light sources. This dimmer module is not a 0-10V dimmer and is not compatible with retractive switches, non-dimmable LED lamps, fluorescent and energy-saving bulbs and tubes, electric motors, and fans. Fit this dimmer as the only switch on a single-pole circuit. Or, to control your lighting from two locations on the same circuit, use this dimmer switch and one 3-way on/off switch. To control from more than two locations

• Plug-in: No.
• Dimmer: Yes.

1G combination duplex outlet and USB-A and USB-C charger in black, featuring our solid metal black, coin screws.

• Material: Stainless Steel.
• Plug-in: No.
• Dimmer: No.
• Outlet type: USB Port.

1G combination duplex outlet and USB-A and USB-C charger in black, featuring our solid metal black, coin screws.

• Material: Stainless Steel.
• Plug-in: No.
• Dimmer: No.
• Outlet type: USB Port.

1 x duplex outlet and 2 x USB-A + C charger.

• Plug-in: No.
• Dimmer: No.
• Outlet type: USB Port.

4 x USB charger.

• Plug-in: No.
• Dimmer: No.
• Outlet type: USB Port.

Schlage Link is now Nexia Home Intelligence, a smart, Internet based system that allows you to control your home from anywhere with most web-connected computers, tablets or smart phones. Wirelessly connect many compatible Z-Wave products through the Bri.

• Product Type: Dimmer
• Mounting / Installation Type: Wall Mounted
• Voltage Type: Line voltage (120 V)
• Overall: 2.5'' H x 3.9'' W x 1.75'' D

Made in Italy with the highest quality 18/10 stainless steel, easy to wash, dishwasher safe, very durable, and high polishing.

Made in Italy with the highest quality 18/10 stainless steel, easy to wash, dishwasher safe, very durable, and high polishing.