1000 Lm - 2000 Lm Landscape Lighting

Create dynamic, eye-catching stunning vignettes with the WAC Colorscaping system. This weatherproof marvel offers vibrant RGB color changes and adjustable white light (2700K to 5000K) for any mood or occasion. Effortless installation with push-in connectors and seamless integration into smart home systems like Google Home and Amazon Alexa via the WAC outdoor controller. Plus, enjoy exceptional clarity and precision with dedicated white LED chips. Colorscaping is a state-of-the-art fully tunable landscape lighting system where each luminaire can be individually controlled or grouped from the myWAC iOS or Android App. Every Colorscaping fixture can be adjusted from 2700K to 6500K and millions of bright and vibrant colors. Colorscaping fixtures connect to a patented WAC Power Supply that is sold in 150W (8150CS-TRN-SS) and 300W (8300CS-TRN-SS) capacities. WAC Colorscaping fixtures are installed to the power supply using standard 12-2 landscape wire making the system incredibly simple to install and retrofit onto an existing landscape lighting system. Data is communicated to Colorscaping fixtures through the 12-2 low voltage landscape cable using PLC (Power Line Communication) technology that sends data signals between the power supply and Colorscaping fixtures, eliminating the need to run secondary wires that can be found in competing smart or color changing landscape systems. Wifi-powered WAC Colorscaping Power Supply can control all fixtures with no Wifi range limitation to your fixtures as long as the power supply is within Wifi range (Cat45 port is available on the power supply for a more reliable hardwired internet connection). The WAC Colorscaping Power Supply features two shared power banks that can be used to power both Colorscaping and basic 12V landscape lighting fixtures on a single system, activating complete smart controls for Colorscaping fixtures and basic smart features for non-Colorscaping fixtures, including timer/scheduler, on/off, and brightness control (note: does not make non-Colorscaping fixtures color tunable). The WAC Colorscaping power supply has multiple 12V taps that can autodetect voltage drop and send a guaranteed balanced 12V to each landscape lighting fixture on the system. The WAC Colorscaping power supply has 16-quick adjust color settings that you can interface with to easily toggle and test your Colorscaping fixtures.

Function meets durability with this LED 6-in inground light. A twist of the light engine inside of the housing at indexed intervals allows fixed beam angle adjustment from flood to spot while a mechanical dial at the base of the light engine provides smooth integral brightness control. The light engine can be tilted in two 10-degree intervals and rotated to cast light in any direction. This wall light has a removable cover that is gasketed to create a water-tight seal with an IP67 rating for protection against high-pressure water jets and outdoor elements. Includes a 3ft lead wire with two gel-filled direct burial wire nuts. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments. Enhanced protection against corrosive elements and is recommended for use in coastal or marine environments. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.

This LED 12V high-performance and durable strip light is IP66-rated for wet locations and integrates smoothly with outdoor 12V transformers, offering diode-free, COB technology illumination. Energy-efficient at only 1.5W per foot, it provides 100 lumens per foot with a 90+ color rendering index. This UV-stabilized, IP66-rated strip is ideal for any setting, including water features. Easy to install with push-in connectors and cuttable for custom lengths. Safe for wet locations and long-lasting with a 50000-hour lifespan, this strip is perfect for creating inviting and efficient outdoor lighting. A magnetic or electronic 12V power supply is required. We suggest a WAC landscape lighting stainless steel outdoor power supply: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN or you can easily connect to an existing 12V landscape lighting system for ease of installation. 1ft, 5ft, or 10ft sections and may be cut in the field at the end of a run (note: unused strip is not useable after field cut, so order sizes according to project needs). A maximum 35ft run length can be created for a single continuous run of strip light. Use with T24-OD-IC6-WT power cable to connect the tape to the power supply.

Landscape accent luminaire. One fixture replaces all older halogen landscape accent lights.

This state-of-the-art landscape lighting wall wash is packed with features. The adjustable wall wash light engine can also be rotated 90 degrees vertically to create a uniform wall wash that can adapt to changing needs. A simple twist of the dial located at the back of the fixture allows continuous beam angle adjustment with indexed intervals from flood to spot while a mechanical dial at the base provides smooth integral brightness control. One SKU fits most applications, eliminating the need to choose from dozens of light bulbs with varying beam angles and light outputs when compared with traditional landscape lights. Factory-sealed and watertight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Solid brass coated in bronze (-BBR finish) is for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments. A detachable shroud is included along with a 9 mounting spike for 12V fixtures (120V fixtures require, power stake sold separately). Includes a 3ft lead wire and two gel-filled direct burial wire nuts. A powerhouse all-in-one flood light that is in line voltage 120 VAC or low voltage 9-15VAC. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.

Create dynamic, eye-catching stunning vignettes with the WAC Colorscaping system. Celebrate artful illumination with new color-scaping wall wash and accent lights from WAC landscape lighting. Heighten drama to render visual impact on magnificent tree trunk and branch silhouettes, brilliant colorful scenery on your hedgerow, or a swath of light washing a facade. Customize your experiences and enjoy your passion for color and the language of light with unbridled enthusiasm and a nearly endless palette. The possibilities are endless. Color-scaping is a state-of-the-art fully tunable landscape lighting system where each luminaire can be individually controlled or grouped from the myWAC iOS or Android app. Every color-scaping fixture can be adjusted from 2700K to 6500K and millions of bright and vibrant colors. Color-scaping fixtures connect to a patented WAC power supply sold in 150W (8150CS-TRN-SS) and 300W (8300CS-TRN-SS) capacities. WAC color-scaping fixtures are installed to the power supply using standard 12-2 landscape wire making the system incredibly simple to install and retrofit onto an existing landscape lighting system. Data is communicated to color-scaping fixtures through the 12-2 low voltage landscape cable using PLC (Power Line Communication) technology that sends data signals between the power supply and color-scaping fixtures, eliminating the need to run secondary wires that can be found in competing smart or color changing landscape systems. WiFi-powered WAC color-scaping power supply can control all fixtures with no WiFi range limitation to your fixtures as long as the power supply is within the WiFi range (Cat45 port is available on the power supply for a more reliable hardwired internet connection). The WAC color-scaping power supply features two shared power banks that can be used to power both color-scaping and basic 12V landscape lighting fixtures on a single system, activating complete smart controls for color-scaping fixtures and basic smart features for non-color-scaping fixtures, including timer/scheduler, on/off, and brightness control (note: does not make non-color-scaping fixtures color tunable). The WAC color-scaping power supply has multiple 12V taps that can autodetect voltage drop and send a guaranteed balanced 12V to each landscape lighting fixture on the system. The WAC color-scaping power supply has 16-quick adjust color settings that you can interface with to easily toggle and test your color-scaping fixtures.