Additional Features

• Airflow Control Technology or ACT is an exclusive technology that gives installers the ability to set the maximum CFM levels to meet local code requirements.
• LumiLight LED lights are eco-friendly and built to last with a lifetime of more than 25,000 hours.
• Compatible with Zephyr Connect App - The Zephyr Connect app allows customers to remotely control their range hoods from anywhere using a mobile device.
• The Zephyr Connect app allows customers to remotely control their range hoods from anywhere using a mobile device.
• Professional Baffle Filters - High-airflow baffle filters that are dishwasher safe and ensure a lifetime of exceptional performance.
• The CleanAir Function powers the hood on every four hours for 10 minutes to refresh the cooking area.
• Vertical or Horizontal Ducting - This hood has the ability to vent either out the top or out the back.
• Optional Ductless Recirculating Kit (ZRC-7036C) - Ductless recirculating kit used when venting air outside your home is not possible. Smoke and odors pass through charcoal filters allowing purified air to be reintroduced into the kitchen.
• Optional Ductless Recirculating Kit (ZRC-7000C) - Ductless recirculating kit used when venting air outside your home is not possible. Smoke and odors pass through charcoal filters allowing purified air to be reintroduced into the kitchen.
• Besides checking the product measurements, you should also:
• Check your venting capabilities; Check if your home has installed ductwork. If it does, or you plan on getting it installed, you should look for a ducted (vented) or convertible range hood. If your home does not have installed ductwork, you should choose a ductless (non-vented) or convertible range hood.
• Measure Your Space: First, measure the width of your cooking surface from one side of the cooktop to the other. Next, measure the width of the area between cabinets where your range hood will live (if applicable). Then, measure the space between the cooking surface and cabinets or ceiling above. There should be anywhere from 24 to 36 inches between the bottom of the range hood and the cooktop surface. Finally, measure the depth from front to back of the cooking surface.