Katana

Katana's KATC01 is a compact hard case from the Professional line, holding one butt and one shaft in a tube-style design. It is sized to fit standard full-length two-piece cues and tucks easily into a closet at home or the back seat of a car. It is a simple, protective way to carry a single cue to league nights and tournament play.

Drew. Dartmouth, NS. Thu Mar 23 2023

For players who carry a playing cue and a break cue, the Katana KATC02 holds two butts and two shafts in a hard oval case with a black vinyl exterior. It measures 34" overall, fits shafts up to 30", and closes with a zippered top. There are no exterior pockets to snag, and a shoulder strap keeps your hands free on the way to the pool hall.

The Katana KATC03 hard case carries two butts and four shafts in an oval vinyl shell finished in charcoal. It fits shafts up to 31", measures 34.5" overall, and closes with snaps, with two pockets, the longest 11", for chalk and tools. A side handle and shoulder strap make it an easy carry for league and tournament play.

Katana's KATC04 soft case gives serious players room for four butts and eight shafts in a rectangular body of white and grey striped vinyl with orange trim. It measures 35" overall, fits shafts up to 33", and closes with a zippered top. One large accessory pocket holds your gear, and backpack straps or a side handle make it easy to carry into tournaments and league nights.

The Katana KATC03 is a hard oval case that holds three butts and five shafts, offered in charcoal or chestnut vinyl. It measures 34.5" overall and fits shafts up to 31", with a snap top closure keeping everything secure. Two accessory pockets, the longest at 11", store chalk and a glove, while a side handle and shoulder strap make it simple to bring a full setup to league play.

At 21 oz, the Katana KAT03 offers a heavier stroke in a cream design with black, cream, and sapphire blue pearlite drop points and alternating diamonds. It plays on a 29" 10-piece radial hard rock maple shaft with a 12.5mm Katana tip by Tiger and a piloted Uni-Loc pin, with a black Irish linen wrap for grip. It suits players who prefer a heavier cue on league night.

The Katana KATXS2 is a replacement shaft for cues with a 5/16x14 joint, giving you a second shaft or a quick upgrade. It is made from 29" of 10-piece radial laminated maple and topped with an 11.5mm Katana tip by Tiger over a 3/8" fiber linen ferrule. Joint protectors are included for storage between matches.

The Katana KATXS2 blank shaft comes without a joint pin installed, so a cue repair shop can fit it to your cue. It uses 29" of 10-piece radial laminated maple with an 11.5mm Katana tip by Tiger and a 3/8" fiber linen ferrule. Joint protectors are included, making it a handy project shaft for repair shops and custom builders.

The Katana KATXS1 shaft is built from 10 pieces of radially laminated maple and finished with a 12.5mm Katana tip made by Tiger. A 3/8" fiber linen ferrule protects the shaft end, and joint protectors are included. It is a practical spare shaft for league players; confirm your cue's joint pin before ordering.

Cues with the common 5/16x18 joint can take the Katana KATXS2, a 29" shaft made from 10 radially laminated maple pieces. An 11.5mm Katana tip by Tiger and a 3/8" fiber linen ferrule finish the playing end. Joint protectors are included, so it is ready to serve as a spare shaft for league play.

Built for Uni-Loc cues, this Katana KATXS2 shaft goes without a collar for a clean joint line. It features 29" of 10-piece radial laminated maple, a 3/8" fiber linen ferrule, and an 11.5mm Katana tip by Tiger. Joint protectors are included, so it is ready to ride along as a spare shaft for league play.

The Katana KATXS2 with a Uni-Loc joint and black collar gives Uni-Loc cue owners a spare or upgraded shaft. Its 29" shaft is made from 10 pieces of radially laminated maple and carries a 3/8" fiber linen ferrule under an 11.5mm Katana tip by Tiger. Joint protectors are included for easy storage in your case.

Katana's KAT03 wraps its forearm and butt sleeve in cream with black, cream, and sapphire blue pearlite drop points, alternating with black and sapphire blue diamonds. The 29" 10-piece radial hard rock maple shaft, 12.5mm Katana tip by Tiger, and piloted Uni-Loc pin form the playing side. This 18 oz cue is weight adjustable, a good fit for home and league players.

Players with a 3/8x10 joint cue can add the Katana KATXS2 as a spare or upgraded shaft. It features 10 pieces of radially laminated maple over a 29" length, a 3/8" fiber linen ferrule, and an 11.5mm Katana tip made by Tiger. Joint protectors are included to keep the threads clean when it is off the cue.

This Katana KATXS2 is a spare shaft for cues with a 5/16x14 joint, made from 29" of maple with 10-piece radial lamination. It carries an 11.5mm Katana tip by Tiger on a 3/8" fiber linen ferrule. Joint protectors come with it, making it a tidy backup shaft to keep in a league bag.

Katana's KATXS1 shaft is built from 10 pieces of radially laminated maple and tipped with a 12.5mm Katana tip made by Tiger over a 3/8" fiber linen ferrule. Joint protectors are included to protect the threads between matches. Confirm the joint on your cue before ordering, then add it as a spare shaft for league play.

The Katana KATXS1 is a low-deflection shaft built from 10 pieces of radially laminated hard rock maple with a pro taper. It is topped with a 12.5mm Katana tip by Tiger on a 3/8" fiber linen ferrule, and joint protectors are included. Confirm your cue's joint pin before ordering, then add it as a spare or upgraded shaft.

The Katana KATXS1 for Uni-Loc cues is a 10-piece low-deflection shaft with a pro taper, ready to thread onto a matching butt. It is topped with a 12.5mm Katana tip by Tiger over a 3/8" fiber linen ferrule, and joint protectors are included. It suits league players looking for a spare low-deflection shaft.

Set at 20 oz, this Katana wood cue listing spans the KAT08, KAT09, KAT10, and KAT11 models, so you can pick the design that fits your style. Each uses a piloted locking joint for a snug connection between shaft and butt. It suits league players and home table owners looking for a steady, mid-weight Katana.

Built for cues with a 3/8x8 pin, the Katana KATXS2 shaft carries an 11.5mm Katana tip by Tiger for players who like a smaller tip. Its 29" shaft uses 10 radial laminated maple pieces and a 3/8" fiber linen ferrule. Joint protectors come included, handy for keeping a spare shaft in your case.