Additional Features

• Raised outer edge helps contain water and prevents items from rolling off the vanity top.
• Faucet, drain assembly, p-trap, shut-off valve, and supply lines are sold separately.
• The overall length of a sink is measured in inches from left to right. Remember that for drop-in sinks with edges or lips, the overall length should be no more than 1" greater than the length of the installation hole in your countertop.
• The overall height of a sink is the external measurement from top to bottom, while the overall depth is the interior measure of how much water the sink can hold.
• The overall width of a sink is measured in inches from front to back. Again, the overall width for drop-in sinks with edges or lips should be no more than 1" greater than the width of the installation hole in your countertop -- keep this in mind when measuring space for your faucet.
• The overall length of a sink is measured in inches from left to right and the overall width is measured from front to back.
• Drop-in, Dual Mount, Undermount
• Remember that under-mount sinks are typically set back 2"-2.5" from the front of the counter.
• Undermount sinks are mounted from below the countertop, so before beginning installation, check to make sure the countertop is 0.5"-1" thick.