Additional Features

• Comes with an iron gate painted on the underside
• The faucet, drain assembly, p-trap, and shut-off valve are sold separately.
• Refer to Spec Sheets for Required and Compatible parts to complete installation
• The Overall Length of a sink is measured in inches from left to right. Remember that for drop-in sinks with edges or lips, the Overall Length should be no more than 1" greater than the length of the installation hole in your countertop.
• The Overall Height of a sink is the external measurement from top to bottom, while the Overall Depth is the interior measure of how much water the sink can hold.
• The Overall Width of a sink is measured in inches from front to back. Again, the Overall Width for drop-in sinks with edges or lips should be no more than 1" greater than the width of the installation hole in your countertop -- keep this in mind when measuring space for your faucet.
• The Overall Length of a sink is measured in inches from left to right and the Overall Width is measured from front to back.
• Remember that undermount sinks are typically set back 2"-2.5" from the front of the counter.
• Remember that a vessel sink adds height to your vanity, so make sure that your vanity is short enough that when the sink is installed, the total height of the vanity and sink is 30-36".
• Undermount sinks are mounted from below the countertop, so before beginning installation, check to make sure the countertop is 1/2"-1" thick.