Additional Features

• Pet-friendly and resistant to spills and stains.
• A metallic rust look is achieved through inkjet technology without any harmful exposure to tarnished metals.
• The use of a leveling system during installation is strongly recommended.
• Certified porcelain tile by the tile council of North America (TCNA).
• This Product has PEI Rating of 5 (endurance and hardness indicator), and therefore is suiter for applications in heavy-traffic locations. Works for any residential and commercial use.
• Disclaimers: Images and product samples are representative of a product’s potential characteristics. There is no guarantee that the sample product or images will 100% match the product received. Field and trim tile may not be an exact match. We reserve the right to make changes to product specifications at any time without notice. Tiles are subject to variations in color, shade, sizing, surface texture and finish. Prior to installation, installer must blend tiles from several different boxes to achieve an even distribution of color range. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. Once installed, the product is deemed accepted. Reference the most current TCNA Handbook, ANSI, manufacturer's specifications, and the Bedrosians® Care & Maintenance guide for installation, outdoor use, care and maintenance information. Improper installation, application, and/or use voids warranty. Please visit www.bedrosians.com for current product information. POLISHED/HONED CERAMIC & PORCELAIN For installation of all polished ceramic/porcelain, polished glazed ceramic/porcelain, and all honed ceramic/porcelain tiles, Manufacturer requires use of a grout release or sealer prior to grouting. Manufacturer also requires use of a grout color that matches the predominant color of the tile. Do not use acidic cleaners on polished ceramic/porcelain, polished glazed ceramic/porcelain, or honed ceramic/porcelain tiles. FLOOR APPLICATION The maximum allowable installation offset is 33%. Minimum grout joint must be 3/16 inch. Please refer to the most current TCNA Handbook. Manufacturer strongly recommends use of a leveling system during installation. DO NOT INSTALL IN POOLS, SPAS/HOT TUBS, AND/OR SUBMERGED APPLICATIONS UNLESS OTHERWISE INDICATED.
• Note: Do not dry-cut porcelain or ceramic tiles when installing due to the potential for exposure to silica dust. Use a wet saw or a score and snap tool when cutting.