Additional Features

• Timeless wood look porcelain panels offer the natural beauty of wood without the hassle of maintaining lumber.
• Porcelain tile allows a wood look in places where real wood is impossible to install.
• Easy to clean and maintain without compromising the color and finish.
• This Product has PEI Rating of 4 (endurance and hardness indicator), and therefore is suited for all residential uses (walls and floors) and light-duty commercial applications
• InkJet technology generates a genuine wooden clone on porcelain tiles.
• Porcelain tiles have low porosity, are extremely durable, and are low maintenance. Polished and honed porcelain tiles require the use of an impregnating or penetrating sealer prior to grouting, otherwise, grout release must be used. Common household spills are easy to clean with the use of a mop, warm water, and a pH-neutral cleaner. Acid-based cleaners and harsh chemicals should not be used.
• This product is non-rectified. Visit bedrosians.com for current information on product application, installation, care, and maintenance. The maximum allowable installation offset is 33%. The minimum grout joint must be 3/16 inches. Please refer to the most current TCNA handbook. The manufacturer strongly recommends the use of a leveling system during installation. Tile is subject to variation in color, shade, sizing, texture, and finish. Images and samples may not 100% match the product received. Field, mosaic and trim tile may not match 100%. Blend tiles from different boxes to achieve even color distribution. Conduct a dry mock layout under proper lighting conditions and inspect the product. Installation constitutes acceptance of the product. Reference TCNA, ANSI, manufacturer's specifications, and Bedrosians' care and maintenance guide for installation and product information. We reserve the right to make product changes without notice. Visit bedrosians.com for current product information. For installation of all polished, polished glazed, and honed porcelain/ceramic tiles, use a grout release prior to grouting and a grout color that matches the predominant color of the tile. Refer to the grout manufacturer's specifications to ensure the use of proper grout. Refer to the tile manufacturer's specifications to determine if the tile is appropriate for commercial applications. Tiles with a polished finish are not appropriate for wet or exterior floor applications. Do not use acidic cleaners. Images and product samples are representative of a product's potential characteristics. There is no guarantee that the sample product or images will 100% match the product received. Field, mosaic, and trim tile may not be an exact match. Tiles are subject to variations in color, shade, size, surface texture, and finish. Before installation, the installer must blend tiles from several boxes to achieve an even distribution of color range. The installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer's responsibility to inspect the product prior to installation to ensure satisfaction. Once installed, the product is deemed accepted. Check the manufacturer's specifications as some mosaic tiles may not be appropriate for wet applications. Reference the most current TCNA handbook, ANSI, manufacturer's specifications, and Bedrosians' care and maintenance guide for installation, outdoor use, care, and maintenance information. Improper installation, application, use, care, and maintenance voids warranty. We reserve the right to make changes to product specifications at any time without notice.
• Post recycle.
• Note: Do not dry-cut porcelain or ceramic tiles when installing due to the potential for exposure to silica dust. Use a wet saw or a score and snap tool when cutting.