Additional Features

• Our most popular heated towel rack at 20 inches wide with classic round, evenly spaced bars is ideal for smaller bathrooms and has the capacity for 2 bath sheets. Fitted with a rotary manual switch (PTSelect) giving you the freedom to switch on and off and adjust the temperature at your convenience.
• Wi-Fi compatibility: This model can be connected to an externally installed Wi-Fi Switch.
• Heating and drying times: Heated towel rack to heat-up: 10 – 15 mins. To add a touch of warmth to a dry towel: 30 – 45 mins (when folded correctly in four layers). To dry an average used, damp towel: 4 – 5 hours (when folded correctly in four layers).
• Adjust the temperature of your Heated Towel Rack: Whether you like the temperature of your heated towel rack hot, medium, or cool, we've got you covered. With the built-in Personal Temperature Selection (PTSelect) Switch, you can personalize your heated towel rack by adjusting the temperature to what suits you the best. You can also switch on and off as needed and reduce running costs by up to 60% when doing so.
• DET - Dry Element Technology: DET is the advanced heating technology that we use in our heated towel racks and it boasts the benefits of rapid heating, where the heated towel rail heats up to working temperature within 10 -15 mins, as well as direct intelligent heating, where it allows an increase in temperature in the horizontal bars under the damp towel. It also allows for dual entry electrical connections with both left and right-hand wiring. Rapid heating is a major advantage of DET, where our heated towel racks reach optimum working temperature within 10 -15 minutes of being switched on. This means they are economically efficient to switch on and off as and when needed.
• The perfect material choice: Grade 304 Stainless Steel is the finest material choice for our heated towel racks because its natural corrosion resistance properties prevent rusting, staining, peeling, flaking, or chipping. Grade 304 stainless steel is also a hygienic material – it is nonporous and does not collect bacteria or algae. Stainless steel does not require a protective coating, making this product ideal for the bathroom environment. The shiny polished stainless steel finish is often confused with a Chrome finish, however, the two could not be more different. While stainless steel will not peel or flake, chrome products on the other hand are susceptible to chipping and pitting due to the nature of a coated surface.
• Electrical wiring: Hardwired – This electric towel rack comes standard as hardwired and the electrical connection must be completed by an electrician. Plug-in. Dual-Entry – This product has a Dual-Entry electrical connection which means it has both LEFT and RIGHT electrical connections and can be connected to any of the two sides straight out of the box to better suit your electrical point.
• Built-in controller: The discreetly built-in PTSelect (Personal Temperature Selection) Switch will enable you to switch the heated towel rail on and off as well as adjust the temperature to suit your personal heat preference. Controller specs: PTSelect Switch. Features: Temperature adjustment + on/off switch + red led indicator; Input voltage range: 90VAC~130VAC; Operating frequency: 60 Hz ±2%; Load capability: 0.18A~4A; Load control range: 40~100%; Standby current: 3.0mA.
• Cleaning and care: To keep the product in pristine condition, simply wipe it down with a warm damp cloth and then buff dry with a microfiber cloth. You could also on occasion, use a Chlorine-free stainless steel cleaner to maintain the gorgeous shine. If you use a stainless steel polish, make sure it is abrasive-free. When cleaning wall surfaces around your heated towel rail make sure not to use any household detergents that contain Chlorine-based chemicals such as bleach, this will cause permanent damage to the surface of the stainless steel.
• Current: 0.50 Amps.
• Volts: 120 VAC.
• IP rating: IPX5.
• Tools needed (not supplied): Drill machine, measuring tape; pencil; PH2 screwdriver; spirit level, a mounting kit which includes cavity wall fasteners [Fischer GK Plasterboard fixings and Screws (3 pieces)].
• Installation tip: Check for water pipes before deciding where to drill. In Masonry walls, always drill a smaller pilot hole first for better sizing and location accuracy.